20K – Omaha, NE

Omaha, Nebraska

CWC-208S– 20,000 BPH

8′ x 8′ x  26′-1″ with 60° slopes plus an additional 4′ upper garner extension for an extra 252 cu. ft.

Other Features:
Abrasion Resistant 1/4″ 400 Steel bolt in liners in hopper cones and hogbacks
Service Platforms on 1st, 2nd and top level access area
Automatic Test Weight Lifting Equipment
(3) 500 lb. State certified NIST Class “F” cast iron test weights with NVLAP traceability
20” square lower garner hydraulic gate with single acting solenoid for full open/close control.
Certified and stamped engineering drawings

Other Supplied Equipment:
Support Tower with ladders and platforms to access equipment
Automatic Vertical Gamet rotary cross cut sampler

Control Equipment:
GMS-4000 bulk weighing control system w/SmartNet Modbus TCP/IP Ethernet Communications

SmartTech automatic scale diagnostics to tell operator when there is a problem. where the problem is located and how to fix the problem.

Wizard Reporting System that provide both standard reports and the ability for the manager to design custom reports without programming knowledge.

Customer needed an accurate transload scale for DDG at 20,000 bushels per hour.  CompuWeigh provided the complete system including support tower, scale, sampler and the computer controls.